Enamel is applied directly to the intersection between two curbed chain links. It is on both sides of the chain. Enamel is applied to the surface and will require special care to avoid damage, discoloration, or chipping. Do not sand, file, or use tools on enamel finish.

If you are soldering this chain to jump rings or end caps, solder at least 3 links away from the enamel or it will melt off the chain. Do not put enameled links in pickle.

Cleaning Instructions:
Polishing cloth and ultrasonic cleaning machines are ok on enameled chain. Anti-tarnish dip cleaning solution is ok for use according to instructions.

Chain Style	Curb
Chain Length	Footage
Chain Clasp	No Clasp
Chain Width MM	2.1mm - 3mm
Chain Wire Links	Round Wire
Link Thickness Gauge	23 Gauge
Link Thickness MM	0.57mm
Link Width MM	2.7mm
Link Length MM	4.1mm
Link ID Gauge	16ga
Link ID MM	1.2mm
Embellishment Width MM	Approximately 2.5mm enamel, Approximately 1.2 inches between enamel