Bright Sterling Silver Glue-On Bail series in an elegant leaf shape so pendants look beautiful from every angle. Leaf contains a slightly recessed area to hold plenty of glue for a secure hold. For use on flat back or undrilled stones or gems. Also, an ideal solution for found objects or art glass. Use a jewelry-quality adhesive to ensure a long-lasting bond.

Step 1:

Consider the following before deciding on your jewelry making findings. First, the back of your glue bail must have sufficient direct contact with the cab and reach at least to the middle of the pendant for a secure connection. With some cabs, the edge is rounded so you will lose that contact surface. Account for that when choosing the bail and go with a larger option. Secondly, you need to make sure the end of the finished necklace can fit through the inner dimensions of the bail that you choose.

Step 2:

You'll need to prepare your pieces before gluing. Use 400 grit sandpaper to remove the oils and dirt from the surface of the bail. Then, sand the back of the cabochon, or other object you are mounting, to roughen the surface with 240 grit sandpaper so the glue adheres better. Use a toothpick to smooth the glue onto the back of the bail and the back of the cabochon.

Step 3:

Proper placement of the bail is important. Make sure it is straight and fully in contact with the surface. It should reach at least halfway to the center of the art glass focal piece for a secure fit. Wipe as much wet glue off the back as you can before it dries. The remaining glue residue can be removed later once the adhesive is thoroughly dry.

Bails
Bail Type	Glue
Bail Size SML	Extra Small